sleeve anchor

Sleeve anchor

Galvanised sleeve anchor ideally suited for the installation of ceiling ladders and rods. Due to the way the anchor works, it can be used in voids or solid materials up to a distance of 5 cm from the tensioning rods. During installation, the anchor should be inserted into the hole and then hammered in until the recess is flush with the surface of the panel. The specially shaped edge prevents the anchor from falling into the slab channel. The optimised geometry of the anchor minimises the energy required for embedding and allows use in extremely narrow spaces, making installation much easier. The internal metric thread allows standard bolts or threaded rods to interact with the anchor, so the anchor can be easily adapted for different purposes.

During installation, the FHY anchor should be inserted into the drilled hole, so hammer in until the recess is flush with the surface of the slab. The anchor must be rested on the fixture to make it spread. When tightening, the cone is pushed into the expansion sleeve, causing it to spread and press against the walls of the hole.

KIT COMPONENTS:

• M8x50 machine screw DIN 933
• Sleeve anchor with female thread FHY M8